A pressure lubricated air compressor pump uses an oil pump to force lubricating oil to all of the friction points. These points include the rod journals, wrist pins and piston skirts. A splash lubricated air compressor pump uses dippers fastened to the connecting rods to splash lubricant to these areas. Pressure lubrication is generally recommended for severe applications, such as high duty cycle or high ambient temperature conditions. Most air compressors use splash lubrication.
10 HP Two-Stage Horizontal 120 GL Tank Air Compressor
$5,242.50 – $6,730.27
Saylor-Beall Compressors are BUILT in America, St. Johns, Michigan.
Great, old school pump, disc valves and large cast iron pump turning at a low RPM, which equates to longer life.
SB also uses Eaton Magnetic Starters (which are optional) and Hubbell Industrial Pressure Switches.
The motors are either Baldor and sometimes they interchange with Lesson Motors on their 5 hp, 1-phase packages (But they normally stick with Baldor).
You cannot go wrong with Saylor-Beall.
CALL FOR PRICING!Description
Gallons
Displaced
Delivered
Displaced
Delivered
Inches
L x W x H
VT-715-80
80
34x29x74
VT-720-80
80
34x29x74
VT-730-80
VT-730-120
80
120
34x29x74
34x30x77
VT-735-80
VT-735-120
80
120
34x29x74
34x30x77
A pressure lubricated air compressor pump uses an oil pump to force lubricating oil to all of the friction points. These points include the rod journals, wrist pins and piston skirts. A splash lubricated air compressor pump uses dippers fastened to the connecting rods to splash lubricant to these areas. Pressure lubrication is generally recommended for severe applications, such as high duty cycle or high ambient temperature conditions. Most air compressors use splash lubrication.
Additional information
1-Phase, Pressure Lubrication, 1-Phase, Splash Lubrication, 3-Phase, Pressure Lubrication, 3-Phase, Splash Lubrication