📞 Call: 913-321-TOOL (8665)

 

Menu
Cart

A6S Autostacker

$7,300.00

6,000-lb. Capacity / Platform Parking Lift / Car Stacker

Autostacker (A6S) is the fully collapsible parking lift that doubles the vehicle capacity of a single parking space. Ideal for home garages and commercial applications alike, this unique lift offers a minimal footprint that maximizes expansion. Easy and safe to use both indoors and outdoors.

CALL FOR PRICING!
SKU: 51752874 Categories: ,

Description

Features & Specs
  • 6,000‐lb. lifting capacity  
  • Key‐switch disconnect fully disables operation for enhanced security
  • Audible alarm and warning buzzer alerts operator and bystanders when the lift is in operation
  • Accommodates cars, light trucks and SUVs  
  • Rugged, welded‐steel construction is strong and durable
  • 100%  hot‐dipped, galvanized steel platform
  • Attractive slate gray, baked‐on powder coat finish provides added toughness
  • Front wheel dish acts as a wheel chock to prevent vehicles from rolling forward or backward
  • Full‐width, gradual sloping platform reduces entry ramp height
  • Automatic safety locks engage at five different parking heights
  • Simple push‐button controls
  • Dual, direct‐drive hydraulic lifting cylinders  
  • Dependable hydraulic circuit that provides precise, equalized lifting
  • Variable height parking accommodates a wide range of vehicle and ceiling heights
  • Contoured scissor legs provide rigidity, decreased deflection and a low collapsed height
  • Full‐width, straight‐through axles increase overall stability and tracking through the vertical travel range
  • Full‐width pivot pins promote straighter tracking of the scissor legs throughout travel—vital for eccentric loads
  • Extra‐wide, heavy‐duty steel scissor arms with cross member bracing enhance stability
  • Unique clevis‐design scissor ends lower stress and increase rigidity by distributing loads symmetrically over the pins
  • Patented asymmetric scissor arms provide greater underside door clearance
  • Patented Door‐sentry™ car door protectors are made from energy‐absorbing rubber to protect against accidental scratches or door dings
  • Space‐saving design is perfect for commercial or residential applications
  • Minimal footprint fits a typical parking space
  • Hydraulic safety valves (velocity fuses) prevent sudden, unexpected platform collapse in the unlikely event of hydraulic system failure  
  • UL Listed electrical components meet National Electrical Code (NEC) requirements

Style

Style:
Multi-Platform Parking Lift

Capacity

Lifting Capacity:
6,000 lbs. (2,722 kg)
Overall width:
103” (2,620 mm)
Overall length:
143” (3,632 mm)
Platform length:
124” (3,150 mm)
Platform width:
83.75” (2,128 mm)
Platform height (forward):
13” (330 mm)
Ramp height (entry):
2” (51 mm)
Maximum underclearance:
80” (2,032 mm)
Under clearance on 1st lock (lowest):
52.5″ (1,331 mm)
Under clearance on 2nd lock:
60.75″ (1,543 mm)
Under clearance on 3rd lock:
68.5″ (1,736 mm)
Under clearance on 4th lock:
75″ (1,909 mm)
Under clearance on 5th lock (highest):
81.25″ (2,064 mm)
Motor:
208-240V, 50/60 Hz / 1 Ph
Noise:
52 dB
Shipping Weight:
2,558 lbs. (1,160 kg)
Shipping Dimensions:
143” x 28” x 22” (3632 mm x 711 mm x 558.8 mm)

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).