Why do so many DIY’ers and technicians choose this BendPak? It’s simple. This parking lift fits into almost every garage with clearance and dimensions of a normal parking space. Lower ceilings or more narrow spaces are generally not a problem! All you need to know are your garage dimensions and lifting needs, and a BendPak representative will outfit you with the best parking lift money can buy.
Choose tall
The HD-9XW four-post lift achieves a formidable 82” rise and features extended-length columns, perfectly accommodating higher-clearance vehicles. Its standard width also makes it ideal for smaller bays and space-conscious home garages.
Choose tall and narrow
In order to park high-stance trucks and SUVs in the lower parking level, you need more height. The HD-9STX is ideal for space-restrictive bays and home garages that could benefit from the lift’s slimmer proportions. This model is popular in garages with ceilings that offer a little extra overhead clearance.
Choose narrow
The HD-9ST is a narrow, standard-height lift that’s perfect for the average one-car or two-car garage. Multiple units are easier to fit side-by-side, doubling your parking in ways you never thought possible. Those inches you save with this lift go a mile when it comes to installing this lift in tighter spaces.
Choose higher rise, wider body
When space is less of an issue, and you’ve got big machines, you need more rise from your parking lift and extra room on the sides. That’s exactly what the HD-9SW offers. The extended all-around proportions will accommodate wide trucks without damaging their big mirrors, and its 82″ rise is ideal for raised suspensions and anything else that needs more room underneath.
Dual-hub cable sheaves
Cable sheaves aren’t the car lift part most people notice or think about… unless these parts malfunction. With periodic maintenance, however, BendPak’s dual hub cable sheaves are more robust and longer-lasting than the thin, narrow sheaves manufactured by our competition. More surface area for the cables to run through means less wear on the wires, and that of course means a more durable parking lift.
Multi-level locking positions
BendPak car lifts feature many lock points, so you have more choice as to where and how you work. The only choice you don’t have is in safety: this parking lift is over-engineered beyond belief. It features industry-leading, automatic spring-loaded locks that engage as the lift rises and disengage the moment it descends. When the lift stops, the locks re-engage automatically. Who said absolute safety has to be complicated?
Heavy-duty aircraft cable
The wires that make up our cables are aircraft-quality; each cable is able to safely hold 14,400 lbs., making the lift capacity of the cables alone 640% more than the 9,000-lb. certified rating. In other words, with just periodic lubrication provided by the user, your cables will last for many years of safe use.
Electric-hydraulic power system
An integrated electric-hydraulic power system is controlled with the touch of a button. It ensures a balanced rise, safe descent and simultaneous lock release at all times. It’s never been easier to operate a parking lift. All seven models feature the same ergonomic control panel placement for your convenience.
Large base plates
Column stability is essential to the safe operation of your parking lift. To make sure your car lift never wobbles or wavers under heavy load, the base plates of each HD-9 model feature 10″ x 12″ dimensions. We simply refuse to skimp on safety or cut corners just to use less steel. You might have a vehicle parked up top for days, weeks or even months! You deserve to know it’s safe up there.
Caster kit
Creating garage space has never been easier. Caster sets can be optionally added to make your parking lift mobile. This is perfect for any shop or garage than wants to diversify how space is used. These wheels make it easy to adjust and reposition the lift. Feel free to keep your car on top while you move it!
Integrated design
All lifting cables, airlines, safety latches and sheaves are safely tucked away into the parking lift structure. They’re not invisible to you, however, so you’re always able to keep an eye on your operations. Internal cables and latches means the precious components that actually move your lift platform are not subject to conditions that may be out of your control (e.g., weather, sudden spills, accidents, tangled clothes).
Low-deck runways
There are parking lifts out there that will rub against your low-bodied vehicles upon approach. Our runways feature a low-profile rise of only 4.5″. No marring, no surprises.
Longer approach ramps
In addition to our low-profile runways, the onboard ramps are extended to keep those sports cars extra-safe. Low ground-clearance vehicles will always mount and roll off our parking lift structures with ease.
Automatic safety locks
Spring-loaded safety locks automatically engage at each ladder position, and they do so continuously as the lift rises. When the platform stops, all four locks will be engaged in a lock position and the lift platform will be even. When the lift descends, they all release at once. A secondary slack-cable detection system will shut down the entire lift application if slack is found in the cables, meaning you can park your vehicles and feel assured that they are protected from virtually anything and everything that could possibly happen.
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
Wide drive-thru with standard lift height and long runways
Electric / hydraulic power system
Internal “Anti-Sway” slider blocks in each column
Features heavy-duty 3/8″ aircraft cable
Multi-position safety locks in each column
Ramps feature non-skid surface
Runways include rail-kit for optional accessories
Single hydraulic cylinder underneath runway
Oversized self-lubricating cable rollers
Rugged 1.25″ roller axles
Adjustable lock ladders
Push-button pneumatic safety release
Optional 4,500-lb. capacity jack available (Model RJ-45)
Capacity
Lifting Capacity*
9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle
4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle
4,500 lbs. (2,041 kg)
Rise
A – Min. Runway Height:
4.5″ (114 mm)
B – Max. Rise:
70″ (1,778 mm)
C – Max. Lifting Height:
74.5″ (1,892 mm)
Time to Full Rise:
50 seconds
Outside Dimensions
D – Overall Width:
110.25″ (2,800 mm)
E – Outside Length:
198″ (5,029 mm)
F – Overall Length:
224″ (5,690 mm)
G – Height of Columns:
88″ (2,235 mm)
Inside Dimensions
H – Width Between Columns:
100.25″ (2,546 mm)
I – Drive-Thru Clearance:
86.5″ (2,197 mm)
Runways
J – Runway Width:
19″ (483 mm)
K – Length of Runways:
188″ (4,775 mm)
L – Width Between Runways:
37.5″ (953 mm) or 44.375″ (1,127 mm)
M – Runway Centerline:
56.5″ (1,435 mm) or 63.375″ (1,610 mm)
N – Outside Edge of Runways:
75.5″ (1,918 mm) or 82.375″ (2,092 mm)
Minimum Wheelbase
Rated Capacity:
135″ (3,429 mm)
75% Capacity:
115″ (2,921 mm)
50% Capacity:
95″ (2,413 mm)
25% Capacity:
80″ (2,032 mm)
Locking
Locking Positions:
12
Lock Spacing:
Every 4″ (102 mm)
Power Unit
Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB
Shipping
Weight:
1,787-lbs. (810.6 kg)
Dimensions:
184” x 21” x 36” (4,674 mm x 533 mm x 914 mm)
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
HD-9XW (5175863)
100” Height, 110.25” Width, 224” Length
9,000-lb. Capacity / Four-Post Lift / Standard Width / High Lift
9,000-lb. maximum lifting capacity
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
Freestanding design
High-rise
Perfect for parking, storage and service
Runways accommodate narrow and standard vehicles
Runways include rail-kit for optional accessories
Electric-hydraulic power system
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks and sheaves
Internal anti-sway slider blocks in each column
Oversized self-lubricating cable rollers
Features heavy-duty 3/8″ aircraft cable
Rugged 1.25″ roller axles
Multi-position safety locks in each column
Adjustable lock ladders
Runways feature non-skid surface
Push-button pneumatic safety release
Independent backup slack-cable safety latches
Customizable power unit location
Removable approach ramps for additional drive-under clearance
Longer approach ramps for low-ground clearance vehicles available
Optional drive-thru ramps available
Optional drip trays available
Optional solid deck available to increase storage capacity
Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
ETL Approved
Capacity
Lifting Capacity*
9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle
4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle
4,500 lbs. (2,041 kg)
Rise
A – Min. Runway Height:
4.5″ (114 mm)
B – Max. Rise:
82″ (2,083 mm)
C – Max. Lifting Height:
86.5″ (2,197 mm)
Time to Full Rise:
50 seconds
Outside Dimensions
D – Overall Width:
110.25″ (2,800 mm)
E – Outside Length:
198″ (5,029 mm)
F – Overall Length:
224″ (5,690 mm)
G – Height of Columns:
100″ (2,540 mm)
Inside Dimensions
H – Width Between Columns:
100.25″ (2,546 mm)
I – Drive-Thru Clearance:
86.5″ (2,197 mm)
Runways
J – Runway Width:
19″ (483 mm)
K – Length of Runways:
188″ (4,775 mm)
L – Width Between Runways:
37.5″ (953 mm) or 44.375″ (1,127 mm)
M – Runway Centerline:
56.5″ (1,435 mm) or 63.375″ (1,610 mm)
N – Outside Edge of Runways:
75.5″ (1,918 mm) or 82.375″ (2,092 mm)
Minimum Wheelbase
Rated Capacity:
135″ (3,429 mm)
75% Capacity:
115″ (2,921 mm)
50% Capacity:
95″ (2,413 mm)
25% Capacity:
80″ (2,032 mm)
Locking
Locking Positions:
15
Lock Spacing:
Every 4″ / 102 mm
Power Unit
Motor:
220 VAC / 60 Hz. 1Ph.
Noise:
45 dB
Shipping
Weight:
1,798-lbs. (815.6 kg)
Dimensions:
192” x 21” x 34” (4,877 mm x 533 mm x 864 mm)
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
Two different ramp lengths to choose from
Narrow width for space efficiency
Freestanding design
Perfect for parking, storage and service
Runways accommodate narrow and standard vehicles
Runways include rail-kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks and sheaves
Internal anti-sway slider blocks in each column
Oversized self-lubricating cable rollers
Features heavy-duty 3/8″ aircraft cable
Rugged 1.25″ roller axles
Multi-position safety locks in each column
Adjustable lock ladders
Runways feature non-skid surface
Push-button pneumatic safety release
Independent backup slack-cable safety latches
Customizable power unit location
Removable approach ramps for additional drive-under clearance
Longer approach ramps for low-ground clearance vehicles
Optional drive-thru ramps available
Optional drip trays available
Optional solid deck available to increase storage capacity
Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
ETL Approved
Capacity
Lifting Capacity*
9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle
4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle
4,500 lbs. (2,041 kg)
Rise
A – Min. Runway Height:
4.5″ (114 mm)
B – Max. Rise:
70″ (1,778 mm)
C – Max. Lifting Height:
74.5″ (1,892 mm)
Time to Full Rise:
45 seconds
Outside Dimensions
D – Overall Width:
100.25″ (2,546 mm)
E – Outside Length:
174″ (4,420 mm)
F – Overall Length:
200″ (5,080 mm)
G – Height of Columns:
88″ (2,235 mm)
Inside Dimensions
H – Width Between Columns:
89.75″ (2,280 mm)
I – Drive-Thru Clearance:
76.5″ (1,943 mm)
Runways
J – Runway Width:
19″ (483 mm)
K – Length of Runways:
164″ (4,166 mm)
L – Width Between Runways:
37.5″ (953 mm)
M – Runway Centerline:
56.5″ (1,435 mm)
N – Outside Edge of Runways:
75.5″ (1,918 mm)
Minimum Wheelbase
Rated Capacity:
115″ (2,921 mm)
75% Capacity:
100″ (2,540 mm)
50% Capacity:
85″ (2,159 mm)
25% Capacity:
70″ (1,778 mm)
Locking
Locking Positions:
12
Lock Spacing:
Every 4″ (102 mm)
Power Unit
Motor:
220 VAC / 60 Hz / 1Ph
Noise:
45 dB
Shipping
Weight:
1,630 lbs. (739.4 kg)
Dimensions:
180″ x 22″ x 40″ (4,572 mm x 559 mm x 1,016 mm)
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC)
HD-9STX (5175862)
100” Height, 100.25” Width, 224” Length
9,000-lb. Capacity / Narrow Width / High Lift
9,000-lb. maximum lifting capacity
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
Freestanding design
Narrow-width
High-rise
Perfect for parking, storage and service
Runways accommodate narrow and standard vehicles
Runways include rail-kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks and sheaves
Internal anti-sway slider blocks in each column
Oversized self-lubricating cable rollers
Features heavy-duty 3/8″ aircraft cable
Rugged 1.25″ roller axles
Multi-position safety locks in each column
Adjustable lock ladders
Runways feature non-skid surface
Push-button pneumatic safety release
Independent backup slack-cable safety latches
Customizable power unit location
Removable approach ramps for additional drive-under clearance
Longer approach ramps for low-ground clearance vehicles
Optional drive-thru ramps available
Optional drip trays available
Optional solid deck available to increase storage capacity
Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
ETL Approved
Capacity
Lifting Capacity*
9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle
4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle
4,500 lbs. (2,041 kg)
Rise
A – Min. Runway Height:
4.5″ (114 mm)
B – Max. Rise:
82″ (2,083 mm)
C – Max. Lifting Height:
86.5″ (2,197 mm)
Time to Full Rise:
50 seconds
Outside Dimensions
D – Overall Width:
100.25″ (2,546 mm)
E – Outside Length:
198″ (5,029 mm)
F – Overall Length:
224″ (5,690 mm)
G – Height of Columns:
100″ (2,540 mm)
Inside Dimensions
H – Width Between Columns:
89.75″ (2,280 mm)
I – Drive-Thru Clearance:
76.5″ (1,943 mm)
Runways
J – Runway Width:
19″ (483 mm)
K – Length of Runways:
188″ (4,775 mm)
L – Width Between Runways:
37.5″ (953 mm)
M – Runway Centerline:
56.5″ (1,435 mm)
N – Outside Edge of Runways:
75.5″ (1,918 mm)
Minimum Wheelbase
Rated Capacity:
135″ (3,429 mm)
75% Capacity:
115″ (2,921 mm)
50% Capacity:
95″ (2,413 mm)
25% Capacity:
80″ (2,032 mm)
Locking
Locking Positions:
15
Lock Spacing:
Every 4″ / 102 mm
Power Unit
Motor:
220 VAC / 60 Hz. 1Ph.
Noise:
45 dB
Shipping
Weight:
1,782-lbs. (808.3 kg)
Dimensions:
190” x 22” x 35” (4,826 mm x 559 mm x 889 mm)
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks and sheaves
Internal anti-sway slider blocks in each column
Oversized self-lubricating cable rollers
Oversized sheave diameter reduces cable fatigue
High-speed lifting
Features heavy-duty 3/8″ aircraft cable
Rugged 1.25″ roller axles
Multi-position safety locks in each column
Adjustable lock ladders
Runways feature non-skid surface
Push-button pneumatic safety release
Independent backup slack-cable safety latches
Inside runways adjust for different tread widths
Customizable power unit location
Removable approach ramps for additional drive-under clearance
Optional drive-thru ramps available
Optional drip trays available
Optional solid deck available to increase storage capacity
Optional 4,500-lb. air / hydraulic rolling jacks available
Capacity
Lifting Capacity*
9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle
4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle
4,500 lbs. (2,041 kg)
Rise
A – Min. Runway Height:
7″ (178 mm)
B – Max. Rise:
70″ (1,778 mm)
C – Max. Lifting Height:
77″ (1,956 mm)
Time to Full Rise:
55 seconds
Outside Dimensions
D – Overall Width:
202″ (5,131 mm)
E – Outside Length:
174″ (4,420 mm)
F – Overall Length:
200″ (5,080 mm)
G – Height of Columns:
90″ (2,286 mm)
Inside Dimensions
H – Width Between Columns:
192″ (4,877 mm)
I – Drive-Thru Clearance:
178″ (4,521 mm)
Runways
J – Runway Width:
19″ (483 mm)
K – Length of Runways:
164″ (4,166 mm)
L – Width Between Runways:
37″ (940 mm) or 42″ (1,067 mm)
M – Runway Centerline:
56″ (1,422 mm) or 61″ (1,549 mm)
N – Outside Edge of Runways:
75″ (1,905 mm) or 80″ (2,032 mm)
Minimum Wheelbase
Rated Capacity:
115″ (2,921 mm)
75% Capacity:
100″ (2,540 mm)
50% Capacity:
85″ (2,159 mm)
25% Capacity:
70″ (1,778 mm)
Locking
Locking Positions:
14
Lock Spacing:
Every 4″ (102 mm)
Power Unit
Motor:
220 VAC / 60 Hz /1 Ph
Noise:
45 dB
Shipping
Weight:
2,752-lbs. (1,248.3 kg)
Dimensions:
219” x 21” x 42” (5,563 mm x 533 mm x 1,067 mm)
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
Double-wide configuration for quad-vehicle storage
Four runways
Super-tall rise
Extra-long ramp
Runways accommodate wide or narrow vehicles
Runways include rail-kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks and sheaves
Internal anti-sway slider blocks in each column
Oversized self-lubricating cable rollers
Oversized sheave diameter reduces cable fatigue
High-speed lifting
Features heavy-duty 3/8″ aircraft cable
Rugged 1.25″ roller axles
Multi-position safety locks in each column
Adjustable lock ladders
Runways feature non-skid surface
Push-button pneumatic safety release
Independent backup slack-cable safety latches
Inside runways adjust for different tread widths
Customizable power unit location
Removable approach ramps for additional drive-under clearance
Optional drive-thru ramps available
Optional drip trays available
Optional solid deck available to increase storage capacity
Optional 4,500-lb. air / hydraulic rolling jacks available
Capacity
Lifting Capacity*
9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle
4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle
4,500 lbs. (2,041 kg)
Rise
A – Min. Runway Height:
7″ (178 mm)
B – Max. Rise:
82″ (2,083 mm)
C – Max. Lifting Height:
89″ (2,261 mm)
Time to Full Rise:
65 seconds
Outside Dimensions
D – Overall Width:
202″ (5,131 mm)
E – Outside Length:
198″ (5,029 mm)
F – Overall Length:
224″ (5,690 mm)
G – Height of Columns:
102″ (2,591 mm)
Inside Dimensions
H – Width Between Columns:
192″ (4,877 mm)
I – Drive-Thru Clearance:
178″ (4,521 mm)
Runways
J – Runway Width:
19″ (483 mm)
K – Length of Runways:
188″ (4,775 mm)
L – Width Between Runways:
37″ (940 mm) or 42″ (1,067 mm)
M – Runway Centerline:
56″ (1,422 mm) or 61″ (1,549 mm)
N – Outside Edge of Runways:
75″ (1,905 mm) or 80″ (2,032 mm)
Minimum Wheelbase
Rated Capacity:
135″ (3,429 mm)
75% Capacity:
115″ (2,921 mm)
50% Capacity:
95″ (2,413 mm)
25% Capacity:
80″ (2,032 mm)
Locking
Locking Positions:
16
Lock Spacing:
Every 4″ (102 mm)
Power Unit
Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB
Shipping
Weight:
2,987-lbs. (1354.9 kg)
Dimensions:
206” x 22” x 40” (5,232 mm x 559 mm x 1,016 mm)
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
Your Auto Lift ships on a LTL common carrier freight company. It is taken to your location on a 48 foot semi truck. Please note the following before making your purchase:
You are responsible for unloading the lift from the truck. The truck driver does not unload it for you.
Lift Gate delivery service is not available for auto lifts.
You cannot unload an auto lift from the truck by hand. You must have machinery that can lift the full weight on your auto lift for unloading from the truck. Fork Lift, Bobcat, Tractor, Tow Truck, Back Hoe are all good options.
If you cannot unload from a truck, we can ship to our carrier’s nearest freight terminal for you to pickup with a trailer or moving van.
You are responsible for calling the freight company to make a delivery appointment. We don’t know your schedule so we can’t do this for you.
Free shipping does not include shipping to Government Secure Locations, State and National Parks, Constructions Sites, Islands, Alaska or Hawaii.
When your lift ships, we will email you the carrier information and tracking number. Freight shipping is slower than small package shipping and can take 3-14 days depending on your location so please be patient.
Triumph Lifts come with a 1 year parts warranty, no labor. You simply call us, we toubleshoot the problem over the phone with you, we ship you the part needed to fix the problem free of charge, the part is free and shipping is free. The free shipping is ground service. We do not cover labor costs for someone to install the replacement part, you must do this yourself or pay someone to do it but most of the time it is very easy for a car mechanic to do themselves. We do not cover the rubber lifting pads, and the cylinders come with a 30 day full warranty and after 30 days we provide a seal kit.
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
HD-9 Series Lifts
9,000-lb. Capacity / Four-Post Parking Lift
Why do so many DIY’ers and technicians choose this BendPak? It’s simple. This parking lift fits into almost every garage with clearance and dimensions of a normal parking space. Lower ceilings or more narrow spaces are generally not a problem! All you need to know are your garage dimensions and lifting needs, and a BendPak representative will outfit you with the best parking lift money can buy.
Choose tall
The HD-9XW four-post lift achieves a formidable 82” rise and features extended-length columns, perfectly accommodating higher-clearance vehicles. Its standard width also makes it ideal for smaller bays and space-conscious home garages.
Choose tall and narrow
In order to park high-stance trucks and SUVs in the lower parking level, you need more height. The HD-9STX is ideal for space-restrictive bays and home garages that could benefit from the lift’s slimmer proportions. This model is popular in garages with ceilings that offer a little extra overhead clearance.
Choose narrow
The HD-9ST is a narrow, standard-height lift that’s perfect for the average one-car or two-car garage. Multiple units are easier to fit side-by-side, doubling your parking in ways you never thought possible. Those inches you save with this lift go a mile when it comes to installing this lift in tighter spaces.
Choose higher rise, wider body
When space is less of an issue, and you’ve got big machines, you need more rise from your parking lift and extra room on the sides. That’s exactly what the HD-9SW offers. The extended all-around proportions will accommodate wide trucks without damaging their big mirrors, and its 82″ rise is ideal for raised suspensions and anything else that needs more room underneath.
Dual-hub cable sheaves
Cable sheaves aren’t the car lift part most people notice or think about… unless these parts malfunction. With periodic maintenance, however, BendPak’s dual hub cable sheaves are more robust and longer-lasting than the thin, narrow sheaves manufactured by our competition. More surface area for the cables to run through means less wear on the wires, and that of course means a more durable parking lift.
Multi-level locking positions
BendPak car lifts feature many lock points, so you have more choice as to where and how you work. The only choice you don’t have is in safety: this parking lift is over-engineered beyond belief. It features industry-leading, automatic spring-loaded locks that engage as the lift rises and disengage the moment it descends. When the lift stops, the locks re-engage automatically. Who said absolute safety has to be complicated?
Heavy-duty aircraft cable
The wires that make up our cables are aircraft-quality; each cable is able to safely hold 14,400 lbs., making the lift capacity of the cables alone 640% more than the 9,000-lb. certified rating. In other words, with just periodic lubrication provided by the user, your cables will last for many years of safe use.
Electric-hydraulic power system
An integrated electric-hydraulic power system is controlled with the touch of a button. It ensures a balanced rise, safe descent and simultaneous lock release at all times. It’s never been easier to operate a parking lift. All seven models feature the same ergonomic control panel placement for your convenience.
Large base plates
Column stability is essential to the safe operation of your parking lift. To make sure your car lift never wobbles or wavers under heavy load, the base plates of each HD-9 model feature 10″ x 12″ dimensions. We simply refuse to skimp on safety or cut corners just to use less steel. You might have a vehicle parked up top for days, weeks or even months! You deserve to know it’s safe up there.
Caster kit
Creating garage space has never been easier. Caster sets can be optionally added to make your parking lift mobile. This is perfect for any shop or garage than wants to diversify how space is used. These wheels make it easy to adjust and reposition the lift. Feel free to keep your car on top while you move it!
Integrated design
All lifting cables, airlines, safety latches and sheaves are safely tucked away into the parking lift structure. They’re not invisible to you, however, so you’re always able to keep an eye on your operations. Internal cables and latches means the precious components that actually move your lift platform are not subject to conditions that may be out of your control (e.g., weather, sudden spills, accidents, tangled clothes).
Low-deck runways
There are parking lifts out there that will rub against your low-bodied vehicles upon approach. Our runways feature a low-profile rise of only 4.5″. No marring, no surprises.
Longer approach ramps
In addition to our low-profile runways, the onboard ramps are extended to keep those sports cars extra-safe. Low ground-clearance vehicles will always mount and roll off our parking lift structures with ease.
Automatic safety locks
Spring-loaded safety locks automatically engage at each ladder position, and they do so continuously as the lift rises. When the platform stops, all four locks will be engaged in a lock position and the lift platform will be even. When the lift descends, they all release at once. A secondary slack-cable detection system will shut down the entire lift application if slack is found in the cables, meaning you can park your vehicles and feel assured that they are protected from virtually anything and everything that could possibly happen.
CALL FOR PRICING!Description
Style
Capacity
HD-9 (5175861)
88” Height, 110.25” Width, 200” Length
9,000-lb. Capacity / Four-Post Lift / Standard Width
Capacity
Rise
Outside Dimensions
Inside Dimensions
Runways
Minimum Wheelbase
Locking
Power Unit
Shipping
HD-9XL (5175859)
88” Height, 110.25” Width, 224” Length
9,000-lb. Capacity / Four-Post Lift / Standard Width / Extended Length
Capacity
Rise
Outside Dimensions
Inside Dimensions
Runways
Minimum Wheelbase
Locking
Power Unit
Shipping
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
HD-9XW (5175863)
100” Height, 110.25” Width, 224” Length
9,000-lb. Capacity / Four-Post Lift / Standard Width / High Lift
Capacity
Rise
Outside Dimensions
Inside Dimensions
Runways
Minimum Wheelbase
Locking
Power Unit
Shipping
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
HD-9ST (5175860)
88” Height, 100.25” Width, 200” Length
9,000-lb. Capacity / Four-Post Lift / Narrow Width
Capacity
Rise
Outside Dimensions
Inside Dimensions
Runways
Minimum Wheelbase
Locking
Power Unit
Shipping
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC)
HD-9STX (5175862)
100” Height, 100.25” Width, 224” Length
9,000-lb. Capacity / Narrow Width / High Lift
Capacity
Rise
Outside Dimensions
Inside Dimensions
Runways
Minimum Wheelbase
Locking
Power Unit
Shipping
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
HD-9SW (5175023)
90” Height, 202” Width, 200” Length
9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide
Capacity
Rise
Outside Dimensions
Inside Dimensions
Runways
Minimum Wheelbase
Locking
Power Unit
Shipping
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
HD-9SWX (5175024)
102” Height, 202” Width, 224” Length
9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide / Extended-Length
Capacity
Rise
Outside Dimensions
Inside Dimensions
Runways
Minimum Wheelbase
Locking
Power Unit
Shipping
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
Your Auto Lift ships on a LTL common carrier freight company. It is taken to your location on a 48 foot semi truck. Please note the following before making your purchase:
When your lift ships, we will email you the carrier information and tracking number. Freight shipping is slower than small package shipping and can take 3-14 days depending on your location so please be patient.
Triumph Lifts come with a 1 year parts warranty, no labor. You simply call us, we toubleshoot the problem over the phone with you, we ship you the part needed to fix the problem free of charge, the part is free and shipping is free. The free shipping is ground service. We do not cover labor costs for someone to install the replacement part, you must do this yourself or pay someone to do it but most of the time it is very easy for a car mechanic to do themselves. We do not cover the rubber lifting pads, and the cylinders come with a 30 day full warranty and after 30 days we provide a seal kit.
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
Additional information
HD-9SWX, HD-9SW-E, HD-9SW, HD-9XL, HD-9XW, HD-9STX, HD-9, HD-9ST
You may also like…
Bendpak Caster Kit
$650.00 Add to cartBendPak Ramps – Steel Ramps (Pair)
$775.00 Add to cartBendpak Air-Electric Workstation / Fits BendPak 2-Post & 4-Post Lifts
$380.00 Add to cartBendPak Boat Trailer Platform
$490.00 Add to cartBendpak Plastic Drip Trays
$135.00 Add to cartBendPak Ramps – Aluminum Ramps (Pair)
$750.00 Add to cart