XPR-10 Series Lifts

Name: XPR-10 Series Lifts
SKU: BP5175395
Price: 4200.00 USD
Availability: InStock

$4,200.00

The XPR series of two-post lifts offer exceptional direct-drive lifting performance.
This industrial-strength car lift guarantees cutting-edge technology, top of the line materials,
a design that’s ahead of its time and a 10,000-lb. lifting capacity.

Every BendPak lift offers an abundant roster of options and accessories that allow you to fully tailor the lift to your unique circumstance. In addition to these features, you’ll be impressed with the long list of standard features and capabilities packed into the structure, parts and components.

When you buy a BendPak two-post lift, you can expect a significant boost in performance and life expectancy. No one surpasses us in quality or safety, which means your BendPak XPR-10S might be the last lift you ever purchase.

Why choose a symmetric lift

Our XPR-10S symmetric two-post lift features an adjustable top beam to accommodate wide or narrow installation setups. This unique configurable design allows you to choose the best setting for your specific space or vehicle lifting requirements. The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership.

Direct-Drive two-post lift technology

The XPR-10 two-post lift features low-pressure HVLP direct-drive cylinders, eliminating the need for lifting chains or screw mechanisms most commonly found on other lift designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and fewer maintenance costs throughout the life of your lift. High volume and low pressure equates to less workload placed on the entire hydraulic system. Direct-Drive technology is preferred on commercial-grade car lifts, as it has it has fewer moving parts than a chain-over-roller cylinder configuration. Pressurized hydraulic fluid flows from the power unit to the hollow cylinder rods, entering the cylinder body and filling its internal cavity. The pressure of the hydraulic fluid extends the piston rod downward, raising the cylinder body and lift carriages. A dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.

Two-stage telescoping screw pad assembly kit

The XPR-10S features double-telescoping screw pads with gouge and tear-resistant polyurethane pads to help increase workplace safety and reduce operating costs. A set of our 63 mm stacking adapters is included with the purchase of a lift.

CALL FOR PRICING!

SKU: BP5175395 Categories: BendPak, Two-Post Lifts

Description
Additional information

Description

XPR-10S

Features & Specs

- 10,000‐lb. lifting capacity
- Expandable top beam accommodates wide or narrow drive‐thru configuration
- Double‐telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Telescoping arm design for more versatile arm positioning
- Single‐piece columns
- Single‐point safety release
- Drop‐end arms provide a lower pad height
- Dual hydraulic direct‐drive cylinders
- Oversized 53″ tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17″ x 19″ A36 steel base plate
- Self‐lubricating dura‐glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3″
- Plated arm restraints and arm pins for rust prevention
- Heavy‐duty 1/2″ aircraft‐quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4‐piece 63 mm stackable adapter set comes standard
- Triple‐telescoping front arms
- ETL Approved

“S” Series Arm Reach Comparison

Capacity

Lifting Capacity*

10,000 lbs. (4,536 kg)

*Max Capacity / Front Axle

5,000 lbs. (2,268 kg)

*Max Capacity / Rear Axle

5,000 lbs. (2,268 kg)

Rise

A – Rise:

69″ (1,753 mm)

B – Rise + Pad Only:

75″ (1,905 mm)

C – Rise + Pad + 63 mm Adapter:

77.5″ (1,969 mm)

D – Min. Height + Pad:

4″ (102 mm)

Time to Full Rise:

Outside Dimensions

E – Height Overall:

145″ (3,683 mm)

F – Width Overall:

132″ (3,353 mm) or 145″ (3,683 mm)

G – Outside Columns:

126.75″ (3,219 mm) or 139.75″ (3,550 mm)

Inside Dimensions

H – Inside Columns:

105.5″ (2,680 mm) or 118.5″ (3,010 mm)

I – Drive-Thru Clearance:

93″ (2,362 mm) or 106″ (2,692 mm)

J – Floor To Overhead Switch:

141″ (3,581 mm)

Arms & Pads

K – Front Arm Reach: (MIN)

27.5″ (699 mm)

K – Front Arm Reach: (MAX)

51.5″ (1,308 mm)

L – Rear Arm Reach: (MIN)

34″ (864 mm)

L – Rear Arm Reach: (MAX)

54.5″ (1,384 mm)

Screw Pad Adjustment:

2″ (51 mm)

Max Load Per Arm

2,500 lbs. (1,134 kg)

Power Unit

Motor:

220 VAC / 60 Hz / 1 Ph

Noise:

45 db

Shipping

Weight:

1,790-lbs. (811.9 kg)

Dimensions:

150” x 24” x 31” (3810 mm x 609 mm x 3810 mm)

Features & Specs

- 10,000‐lb. lifting capacity
- Expandable top beam accommodates wide or narrow drive‐thru configuration
- Double‐telescoping screw pads offer increased versatility
- Added overhead safety shutoff bar
- Exclusive Tru‐Metric arm design for more versatile arm positioning
- 30° rotated single‐piece columns
- Single‐point safety release
- Drop‐end arms provide a lower pad height
- Dual hydraulic direct‐drive cylinders
- Oversized 53″ tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17″ x 19″ A36 steel base plate
- Self‐lubricating dura‐glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3″
- Plated arm restraints and arm pins for rust prevention
- Heavy‐duty 1/2″ aircraft‐quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4‐piece 63 mm stackable adapter set comes standard
- Triple‐telescoping arm design
- Versatile drop‐in contact pads with stackable adapters
- ETL Approved

“S” Series Arm Reach Comparison

Capacity

Lifting Capacity*

10,000 lbs. (4,536 kg)

*Max Capacity / Front Axle

5,000 lbs. (2,268 kg)

*Max Capacity / Rear Axle

5,000 lbs. (2,268 kg)

Rise

A – Rise:

69″ (1,753 mm)

B – Rise + Pad Only:

73″ (1,854 mm)

C – Rise + Pad + 63 mm Adapter:

79″ (2,007 mm)

D – Min. Height + Pad:

4″ (102 mm)

Time to Full Rise:

45 seconds

Outside Dimensions

E – Height Overall:

145″ (3,683 mm)

F – Width Overall:

137″ (3,480 mm) or 145″ (3,683 mm)

G – Outside Columns:

133.25″ (3,385 mm) or 141.25″ (3,588 mm)

Inside Dimensions

H – Inside Columns:

106.25″ (2,699 mm) or 114.25″ (2,902 mm)

I – Drive-Thru Clearance:

93.75″ (2,381 mm) or 101.75″ (2,584 mm)

J – Floor To Overhead Switch:

141″ (3,581 mm)

Arms & Pads

K – Front Arm Reach: (MIN)

23.5″ (597 mm)

K – Front Arm Reach: (MAX)

43.75″ (1,111 mm)

L – Rear Arm Reach: (MIN)

40.25″ (1,022 mm)

L – Rear Arm Reach: (MAX)

58″ (1,473 mm)

Screw Pad Adjustment:

2″ (51 mm)

Max Load Per Arm

2,500 lbs. (1,134 kg)

Power Unit

Motor:

220 VAC / 60 Hz / 1 Ph

Noise:

45 dB

Shipping

Weight:

1,786-lbs. (810.1 kg)

Dimensions:

150” x 24” x 35” (3810 mm x 609 mm x 889 mm)

Features & Specs

Lift arms shown with optional foot guards
10,000‐lb. lifting capacity
Expandable top beam accommodates wide or narrow configuration
Double‐telescoping screw pads offer increased versatility
Padded overhead safety shutoff bar
Single‐piece columns
Dual hydraulic direct‐drive cylinders
Automatic arm restraints
Lowered arm tube supports
Maintenance-free UHMW load bearings
Oversized 59″ tall carriage for superior strength and durability
Electric / hydraulic power system
Large, 17″ x 19″ A36 steel base plate
Self‐lubricating dura‐glide UHMW polyethylene bearing system
Single‐point safety release
Safety locks in each column spaced every 3″
Automatic overhead shutoff
Plated arm restraints and arm pins for rust prevention
Heavy‐duty 1/2″ aircraft‐quality equalizer cables
Oversized cable sheave diameter reduces cable fatigue
4‐piece 63 mm stackable adapter set comes standard
ALI Certified

Capacity

Lifting Capacity*

10,000 lbs. (4,536 kg)

*Max Capacity / Front Axle

5,000 lbs. (2,268 kg)

*Max Capacity / Rear Axle

5,000 lbs. (2,268 kg)

Rise

A – Rise:

75″ (1,905 mm)

B – Rise + Pad Only:

79.75″ (2,026 mm)

C – Rise + Pad + 63 mm Adapter:

82.25″ (2,089 mm)

D – Min. Height + Pad:

4.75″ (121 mm)

Time to Full Rise:

50 seconds

Outside Dimensions

E – Height Overall:

157″ (3,988 mm)

F – Width Overall:

132″ (3,353 mm) or 145″ (3,683 mm)

G – Outside Columns:

126.75″ (3,219 mm) or 139.75″ (3,550 mm)

Inside Dimensions

H – Inside Columns:

105.5″ (2,680 mm) or 118.5″ (3,010 mm)

I – Drive-Thru Clearance:

93″ (2,362 mm) or 106″ (2,692 mm)

J – Floor To Overhead Switch:

147″ (3,734 mm)

Arms & Pads

K – Front Arm Reach: (MIN)

25.5″ (648 mm)

K – Front Arm Reach: (MAX)

49.5″ (1,257 mm)

L – Rear Arm Reach: (MIN)

32.25″ (819 mm)

L – Rear Arm Reach: (MAX)

52.5″ (1,334 mm)

Screw Pad Adjustment:

2″ (51 mm)

Max Load Per Arm

2,500 lbs. (1,134 kg)

Power Unit

Motor:

220 VAC / 60 Hz / 1 Ph

Noise:

45 dB

Features & Specs

Lift arms shown with optional foot guards
10,000‐lb. lifting capacity
Expandable top beam accommodates wide or narrow configuration
Double‐telescoping screw pads offer increased versatility
Padded overhead safety shutoff bar
Single‐piece columns
Dual hydraulic direct‐drive cylinders
Automatic arm restraints
Lowered arm tube supports
Maintenance-free UHMW load bearings
Oversized 59″ tall carriage for superior strength and durability
Electric / hydraulic power system
Large, 17″ x 19″ A36 steel base plate
Self‐lubricating dura‐glide UHMW polyethylene bearing system
Single‐point safety release
Safety locks in each column spaced every 3″
Automatic overhead shutoff
Plated arm restraints and arm pins for rust prevention
Heavy‐duty 1/2″ aircraft‐quality equalizer cables
Oversized cable sheave diameter reduces cable fatigue
4‐piece 63 mm stackable adapter set comes standard
ALI Certified

Capacity

Lifting Capacity*

10,000 lbs. (4,536 kg)

*Max Capacity / Front Axle

5,000 lbs. (2,268 kg)

*Max Capacity / Rear Axle

5,000 lbs. (2,268 kg)

Rise

A – Rise:

75″ (1,905 mm)

B – Rise + Pad Only:

79.75″ (2,026 mm)

C – Rise + Pad + 63 mm Adapter:

82.75″ (2,102 mm)

D – Min. Height + Pad:

4.75″ (121 mm)

Time to Full Rise:

50 seconds

Outside Dimensions

E – Height Overall:

157″ (3,988 mm)

F – Width Overall:

137″ (3,480 mm) or 145″ (3,683 mm)

G – Outside Columns:

133.25″ (3,385 mm) or 141.25″ (3,588 mm)

Inside Dimensions

H – Inside Columns:

106.25″ (2,699 mm) or 114.25″ (2,902 mm)

I – Drive-Thru Clearance:

93.75″ (2,381 mm) or 101.75″ (2,584 mm)

J – Floor To Overhead Switch:

147″ (3,734 mm)

Arms & Pads

K – Front Arm Reach: (MIN)

23.5″ (597 mm)

K – Front Arm Reach: (MAX)

43.75″ (1,111 mm)

L – Rear Arm Reach: (MIN)

40.25″ (1,022 mm)

L – Rear Arm Reach: (MAX)

58″ (1,473 mm)

Screw Pad Adjustment:

2″ (51 mm)

Max Load Per Arm

2,500 lbs. (1,134 kg)

Power Unit

Motor:

220 VAC / 60 Hz / 1 Ph

Noise:

45 dB

Shipping

Weight:

1,814-lbs. (822.8 kg)

Dimensions:

164” x 24” x 29” (4165 mm x 609 mm x 737 mm)

Additional information

Model #	XPR-10S, XPR-10AS, XPR-10XLS, XPR-10AXLS

XPR-10 Series Lifts

Why choose a symmetric lift

Direct-Drive two-post lift technology

Two-stage telescoping screw pad assembly kit

Description

Features & Specs

Capacity

Rise

Outside Dimensions

Inside Dimensions

Arms & Pads

Power Unit

Shipping

Additional information

Accessories

ATD 8 Gallon Plastic Waste Oil Drain with Casters

ATD-7446 6 Ton Jack Stand Ratchet Style

BendPak 60mm Lift Adapters For 2019 GMC Sierra & Chevrolet Silverado Trucks

Bendpak Air-Electric Workstation / Fits BendPak 2-Post & 4-Post Lifts

DoorjammerPRO (pair) 24″ tall