Challenger’s heavy-duty mobile lifting system are robust, yet easily maneuverable and can be operated on almost any solid surface, indoors or out. Mobile lifts provide the flexibility and convenience to lift any rubber-tired vehicle, from small passenger cars to large 2-, 3- or 4-axle vehicles up to 152,000 pounds. Our heavy-duty mobile lifts are also capable of lifting vehicles of any axle length or wheelbase. Models are available in 14,000 lb. or 19,000 lb. capacity columns.
Hydraulic operated units provide 28,000/38,000 (set of 2) or 112,000/152,000 lbs. (set of 8) lifting capacity
110-volt built-in multi-stage charging system
Wireless system for clutter-free work area without cables to connect, navigate, roll-over or replace
Adjustable wheel carriage adapts to most tire sizes
12 radio frequencies with a wide channel range prevents radio noise from interrupting service
Linear position transducers maintain system synchronization and ensure maximum reliability
Integrated touch screen control console at each column allows operation from any unit
Precise balanced design, heavy-duty tow handle and spring-loaded wheels for easy mobility
Operates with 12-volt deep cycle batteries eliminating the need for power source hookups and providing 24-volt operation
Integrated weight gauges help prevent column overloading and verify lock engagement
Wide range of accessories available to further customize your columns to lift specialty heavy-duty trucks, transit and municipality vehicles, forklifts, cab removal of standard pickup trucks and more
Model Number
CLHM-140
CLHM-190
CLHM-190W
Lifting Capacity Per Column
14,000 lbs.
19,000 lbs.
19,000 lbs.
Height of Lift Unit
88.5″
88.5″
88.5″
Height of Lift Unit at Full Rise
157.125″
157.125″
157.125″
Width of Lift Unit
44.25″
44.25″
49″
Length of Lift Unit
53.625″
53.625″
53.625″
Maximum Lift Height (4 or more units)
69″
69″
69″
Maximum Lift Height (2 units – Normal Mode)
32″
32″
32″
Min-Max Wheel Diameter
5″ – 24.5″
5″ – 24.5″
4″ – Max det. by tire size
Max. Hydraulic System Operating Pressure
2,180 psi
2,600 psi
2,600 psi
Lift Speed (Max Load)
60″ per min.
60″ per min.
60″ per min.
Weight of Lift Unit
1,485 lbs
1,510 lbs
1,575 lbs
Footprint of Lift Unit
560 sq. in.
560 sq. in.
600 sq. in.
Ground Pressure for each Lift (Max. Load)
27.7 psi
36.6 psi
34.3 psi
Turning Radius of Lift Unit
47″
47″
47″
Operating Peak Power
4HP
4HP
4HP
Operating Voltage
24 VDC nominal
25 VDC nominal
26 VDC nominal
Charger Voltage Required
120 VAC @ 60 Hz
120 VAC @ 60 Hz
120 VAC @ 60 Hz
Charger Amps Required
1.3 Amps
1.3 Amps
1.3 Amps
ALI/ETL Certified
Yes
Yes
Yes
Colors Available
Blue
Blue
Blue
ADAPTERS
Crossbeam Adapter (32,000 lbs.) – CLHM-CB-32A
End Lift Adapter (9,000 lbs.) – CLHM-ELA-90A
Forklift Adapter (15,000 lbs.) – CLHM-FLA
Third Wheel Forklift Adapter – CLHM-FLA-3WA
Cab Off Adapter (1,500 lbs.) – CLHM-CA-15
Small Wheel Adapter – CLHM-LSA
SUPPORT STANDS
Short Support Stand (20,000 lbs. 20″-32″) (Sold in pairs) – CLHM-10-TH
Medium Support Stand (20,000 lbs. 30″-52″) (Sold in pairs) – CLHM-10-THF
Gas-assisted High Stand (14,000 lbs. 53″-72″) (Sold individually) – CLHM-7-THR
Gas-assisted High Stand (20,000 lbs. 53″-72″) (Sold individually) – CLHM-10-THR
ACCESSORIES
Clutch jack (300 lbs.) – CLHM-HR-300
Transmission Jack (2,200 lbs.) – CLHM-HTCJ-2000
Magnetic light kit (sold in pairs) – CLHM-LS-LK
Wheel Dolly (1,200 lbs.) – CLHM-WHD-12
Rear Axle Restraint (2,000 lbs.) – CLHM-RAR-20
Touch Screen Glare Shield – CLHM-GS
Full Cover for Mobile Column (Sold individually) – CLHM-CVR-F
Half Cover for Mobile Column (Sold individually) – CLHM-CVR-H
CLHM Heavy Duty Mobile Column Car Lift
Challenger’s heavy-duty mobile lifting system are robust, yet easily maneuverable and can be operated on almost any solid surface, indoors or out. Mobile lifts provide the flexibility and convenience to lift any rubber-tired vehicle, from small passenger cars to large 2-, 3- or 4-axle vehicles up to 152,000 pounds. Our heavy-duty mobile lifts are also capable of lifting vehicles of any axle length or wheelbase. Models are available in 14,000 lb. or 19,000 lb. capacity columns.
ALI/ETL certified.
CALL FOR PRICING!Description
ADAPTERS
SUPPORT STANDS
ACCESSORIES