A rolling bridge jack is the only way to turn a four-post lift into a full-service car lift. Each frame-engaging jack lifts one-half of your car, and two will raise all four wheels off the runways. Wheel service becomes a cinch, and your BendPak might be the last lift you ever purchase for service and vehicle storage.
BendPak offers seven rolling bridge jack models that are designed to hold between 4,500 lbs. and 25,000 lbs. each. Each jack is placed on top of a four-post lift, so it can ​slide between the runways. It elevates the frame of your vehicle to permit access to the wheels. Bridge jacks help get the most out of your car lift and dramatically increase your service abilities. You’ll be able to change tires without sending your wheels across the street. Simply balance them on your own wheel balancer. If you purchased an alignment lift and wheel aligner, you can perform full alignment services after returning fresh, balanced tires and wheels to the car. By not having to change lifts, you revolutionize your workflow with greater efficiency, and ultimately, more profit.
4,500-lb. Capacity / Rolling Bridge Jack / Easy-Roll Wheels / Low-Profile
BendPak RJ45LP rolling bridge jack is designed to hold up to 4,500 lbs. and features a low-profile design with easy-to-roll wheels. Use this 4-post bridge jack with your BendPak HD-9 series four-post car lift for increased versatility and productivity.
4,500-lb. Capacity / Rolling Bridge Jack / Easy-Roll Wheels
BendPak RJ45W rolling bridge jack is designed to hold up to 4,500 lbs. and features easy-to-roll wheels that make sliding simple between the four-post lift runways. Use this 4-post bridge jack with your BendPak HD-9 series four-post car lift for increased versatility and productivity.
Features & Specs
4,500-lb. lifting capacity
Easy-Roll Wheels
Rubber contact pads
Stackable adapters
High-pressure hydraulic power unit
Optional air-line kit
RJ45W Specifications
Lifting Capacity
4,500 lbs. (2,041 kg)
Suitable Lift Model(s)
HD-7 Series, HD-9 Series, GP-9 Series
Min. Drive-Over Height*
Pad Only:
4.5″ (114 mm)
Pad + 2.75″ Adapter:
7.25″ (184 mm)
Pad + 5.5″ Adapter:
10″ (254 mm)
Max. Lifting Height*
Pad Only:
15.5″ (394 mm)
Pad + 2.75″ Adapter:
18.25″ (464 mm)
Pad + 5.5″ Adapter:
21″ (533 mm)
Reach
Support Base Width:
35.5″ (902 mm) – 46.5″ (1,181 mm)
Max. Arm Reach:
57″ (1,448 mm)
Min. Arm Reach:
42″ (1,067 mm)
Time to Full Rise:
55 seconds
Pump:
Air/Hydraulic
Air Pressure:
125 PSI (10-25 CFM)
Max. Operating Hydraulic Pressure:
2,490 PSI
Power Requirement:
None
Shipping Weight:
378 lbs. (171 kg)
Shipping Dimensions:
42″ x 24″ x 12″ (1,066 mm x 609 mm x 304 mm)
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
RJ6W
6,000-lb. Capacity / Rolling Bridge Jack / Easy-Roll Wheels
This 6,000-lb. capacity rolling bridge jack is specifically designed for use with a full-sized scissor lift or four-post lift. The RJ6W provides you with the ability and added versatility to raise the wheels off the runways of your car lift.
Features & Specs
6,000-lb. lifting capacity
Easy-Roll Wheels
Rubber contact pads
Stackable adapters
High-pressure hydraulic power unit
Optional air-line kit
RJ6W Specifications
Lifting Capacity
6,000 lbs. (2,721 kg)
Suitable Lift Model(s)
XR-12000 Series
Min. Drive-Over Height*
Pad Only:
1.25″ (32 mm)
Pad + 2.75″ Adapter:
4″ (102 mm)
Pad + 5.5″ Adapter:
6.75″ (171 mm)
Max. Lifting Height*
Pad Only:
12″ (305 mm)
Pad + 2.75″ Adapter:
14.75″ (375 mm)
Pad + 5.5″ Adapter:
17.5″ (445 mm)
Reach
Support Base Width:
36.25″ (921 mm) – 47.25″ (1,200 mm)
Max. Arm Reach:
56″ (1,422 mm)
Min. Arm Reach:
42″ (1,067 mm)
Time to Full Rise:
55 seconds
Pump:
Air/Hydraulic
Air Pressure:
125 PSI (10-25 CFM)
Max. Operating Hydraulic Pressure:
3,370 PSI
Power Requirement:
None
Shipping Weight:
436 lbs. (193 kg)
Shipping Dimensions:
42″ x 24″ x 14″ (1,066 mm x 609 mm x 355 mm)
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Â
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
RJ7W
7,000-lb. Capacity / Rolling Bridge Jack / Easy-Roll Wheels
This 7,000-lb. capacity rolling bridge jack is made for an HDS-14 series four-post lift. Each rolling jack comes complete with three safety-lock positions and stackable pad adapters to provide added clearance when needed.
Features & Specs
7,000-lb. lifting capacity
Easy-Roll Wheels
Rubber contact pads
Stackable adapters
High-pressure hydraulic power unit
Optional air-line kit
RJ7W Specifications
Lifting Capacity
7,000 lbs. (3,175 kg)
Suitable Lift Model(s)
HDS-14 Series, HDSO14P
Min. Drive-Over Height*
Pad Only:
4″ (102 mm)
Pad + 2.75″ Adapter:
6.75″ (171 mm)
Pad + 5.5″ Adapter:
9.5″ (241 mm)
Max. Lifting Height*
Pad Only:
14.75″ (375 mm)
Pad + 2.75″ Adapter:
17.5″ (445 mm)
Pad + 5.5″ Adapter:
20.25″ (514 mm)
Reach
Support Base Width:
36.25″ (921 mm) – 46.5″ (1,181 mm)
Max. Arm Reach:
56″ (1,422 mm)
Min. Arm Reach:
42″ (1,067 mm)
Time to Full Rise:
55 seconds
Pump:
Air/Hydraulic
Air Pressure:
125 PSI (10-25 CFM)
Max. Operating Hydraulic Pressure:
4,550 PSI
Power Requirement:
None
Shipping Weight:
440 lbs. (200 kg)
Shipping Dimensions:
42″ x 25″ x 15″ (1,066 mm x 635 mm x 381 mm)
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
RJ9W
9,000-lb. Capacity / Rolling Bridge Jack / Easy-Roll Wheels
BendPak’s 9,000-lb. capacity rolling bridge jack is ideal for use on the HDS-18E four-post lift, especially if your vehicles have an unbalanced center of gravity. This jack is ideal for heavier trucks and SUVs.
Features & Specs
9,000-lb. lifting capacity
Easy-Roll Wheels
Rubber contact pads
Stackable adapters
High-pressure hydraulic power unit
Optional air-line kit
RJ9W Specifications
Lifting Capacity
9,000 lbs. (4,082 kg)
Suitable Lift Model(s)
HDS-18E, HDS-27 Series
Min. Drive-Over Height*
Pad Only:
5.25″ (133 mm)
Pad + 2.75″ Adapter:
8″ (203 mm)
Pad + 5.5″ Adapter:
10.75″ (273 mm)
Max. Lifting Height*
Pad Only:
16.25″ (413 mm)
Pad + 2.75″ Adapter:
19″ (483 mm)
Pad + 5.5″ Adapter:
21.75″ (552 mm)
Reach
Support Base Width:
45″ (1,143 mm) – 50″ (1,270 mm)
Max. Arm Reach:
56″ (1,422 mm)
Min. Arm Reach:
42″ (1,067 mm)
Time to Full Rise:
55 seconds
Pump:
Air/Hydraulic
Air Pressure:
125 PSI (10-25 CFM)
Max. Operating Hydraulic Pressure:
5,020 PSI
Power Requirement:
None
Shipping Weight:
478 lbs. (217 kg)
Shipping Dimensions:
47″ x 25″ x 15″ (1,206 mm x 635 mm x 381 mm)
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
RBJ15000
15,000-lb. Capacity / Rolling Bridge Jack
Our 15,000-lb. capacity bridge jack is made just for the HDS-35 four-post lift. This particular car lift is truly made for massive trucks and commercial equipment. Check out the RBJ15000 jack if you need to perform full wheel service on heavy-duty vehicles.
Features & Specs
15,000-lb. lifting capacity
Steel lifting pads standard
High-pressure hydraulic power unit
Optional air-line kit
RBJ15000 Specifications
Lifting Capacity
15,000 lbs. (6,804 kg)
Suitable Lift Model(s)
HDS-27 Series, HDS-40 Series
Min. Drive-Over Height*
Short Arm Pad:
9″ (229 mm)
Short Top Pad:
10″ (254 mm)
Tall Arm Pad:
11″ (279 mm)
Tall Top Pad:
12″ (305 mm)
Max. Lifting Height*
Short Arm Pad:
19″ (483 mm)
Short Top Pad:
20″ (508 mm)
Tall Arm Pad:
21″ (533 mm)
Tall Top Pad:
22″ (559 mm)
Reach
Support Base Width:
45.75″ (1,162 mm) – 59″ (1,499 mm)
Max. Arm Pad Reach:
63.75″ (1,619 mm)
Min. Arm Pad Reach:
48.5″ (1,232 mm)
Max. Top Pad Reach:
39.5″ (1,003 mm)
Min. Top Pad Reach:
7.75″ (197 mm)
Time to Full Rise:
55 seconds
Pump:
Air/Hydraulic
Air Pressure:
125 PSI (10-25 CFM)
Max. Operating Hydraulic Pressure:
6,000 PSI
Power Requirement:
None
Shipping Weight:
708 lbs. (321 kg)
Shipping Dimensions:
48″ x 29″ x 18″ (1,238 mm x 736 mm x 457 mm)
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
BendPak Rolling Bridge Jacks
$5,000.00
A rolling bridge jack is the only way to turn a four-post lift into a full-service car lift. Each frame-engaging jack lifts one-half of your car, and two will raise all four wheels off the runways. Wheel service becomes a cinch, and your BendPak might be the last lift you ever purchase for service and vehicle storage.
BendPak offers seven rolling bridge jack models that are designed to hold between 4,500 lbs. and 25,000 lbs. each. Each jack is placed on top of a four-post lift, so it can ​slide between the runways. It elevates the frame of your vehicle to permit access to the wheels. Bridge jacks help get the most out of your car lift and dramatically increase your service abilities. You’ll be able to change tires without sending your wheels across the street. Simply balance them on your own wheel balancer. If you purchased an alignment lift and wheel aligner, you can perform full alignment services after returning fresh, balanced tires and wheels to the car. By not having to change lifts, you revolutionize your workflow with greater efficiency, and ultimately, more profit.
CALL FOR PRICING!Description
RJ45LP
4,500-lb. Capacity / Rolling Bridge Jack / Easy-Roll Wheels / Low-Profile
BendPak RJ45LP rolling bridge jack is designed to hold up to 4,500 lbs. and features a low-profile design with easy-to-roll wheels. Use this 4-post bridge jack with your BendPak HD-9 series four-post car lift for increased versatility and productivity.
Features & Specs
RJ45LP Specifications
Min. Drive-Over Height*
Max. Lifting Height*
Reach
RJ45W
4,500-lb. Capacity / Rolling Bridge Jack / Easy-Roll Wheels
BendPak RJ45W rolling bridge jack is designed to hold up to 4,500 lbs. and features easy-to-roll wheels that make sliding simple between the four-post lift runways. Use this 4-post bridge jack with your BendPak HD-9 series four-post car lift for increased versatility and productivity.
Features & Specs
RJ45W Specifications
Min. Drive-Over Height*
Max. Lifting Height*
Reach
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
RJ6W
6,000-lb. Capacity / Rolling Bridge Jack / Easy-Roll Wheels
This 6,000-lb. capacity rolling bridge jack is specifically designed for use with a full-sized scissor lift or four-post lift. The RJ6W provides you with the ability and added versatility to raise the wheels off the runways of your car lift.
Features & Specs
RJ6W Specifications
Min. Drive-Over Height*
Max. Lifting Height*
Reach
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
RJ7W
7,000-lb. Capacity / Rolling Bridge Jack / Easy-Roll Wheels
This 7,000-lb. capacity rolling bridge jack is made for an HDS-14 series four-post lift. Each rolling jack comes complete with three safety-lock positions and stackable pad adapters to provide added clearance when needed.
Features & Specs
RJ7W Specifications
Min. Drive-Over Height*
Max. Lifting Height*
Reach
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
RJ9W
9,000-lb. Capacity / Rolling Bridge Jack / Easy-Roll Wheels
BendPak’s 9,000-lb. capacity rolling bridge jack is ideal for use on the HDS-18E four-post lift, especially if your vehicles have an unbalanced center of gravity. This jack is ideal for heavier trucks and SUVs.
Features & Specs
RJ9W Specifications
Min. Drive-Over Height*
Max. Lifting Height*
Reach
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
RBJ15000
15,000-lb. Capacity / Rolling Bridge Jack
Our 15,000-lb. capacity bridge jack is made just for the HDS-35 four-post lift. This particular car lift is truly made for massive trucks and commercial equipment. Check out the RBJ15000 jack if you need to perform full wheel service on heavy-duty vehicles.
Features & Specs
RBJ15000 Specifications
Min. Drive-Over Height*
Max. Lifting Height*
Reach
* Dimensions listed are taken from the upper surface of the suitable four-post lift runway.
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
Warranty
Download
Additional information
RJ45LP, RJ45W, RJ6W, RJ7W, RJ9W, RBJ15000, RBJ18000, RBJ25000